Pole Installation in Hollywood, FL

Pole Installers is a licensed, family-owned pole company based in Hollywood, Florida. We drill, set and brace light poles, utility and meter poles, sign poles, flagpoles and sports lighting poles for general contractors, property managers, HOAs and homeowners across the city and the rest of Broward County. Our own crews and equipment handle every job, from the first hole to the final plumb check.

Satisfied Pole Installers customer profile
Satisfied Pole Installers customer profile
Satisfied Pole Installers customer profile
Satisfied customers
1376 +
Pole installer wearing a safety harness and hard hat

Licensed, Insured Crews for Hollywood Job Sites

Our auger trucks drill holes up to 48 inches across, and our boom trucks and cranes lift heavy and tall poles into place. Because we’re based in Hollywood, that equipment is a short drive from most job sites in the city.

Tell us when the site is ready and what else is happening on it. We plan where the trucks park, how they reach each hole and which day we drill, so pole work fits into the rest of the build instead of holding it up.

Each hole is drilled to the depth the pole’s height and load call for. We set the pole plumb, check it again before the concrete goes in, and brace it while it cures so it stays straight through summer storms.

Pole Installers crew member checking a freshly drilled pole hole
Pole Installers crew drilling a sign pole foundation
5500
+
Poles Placed In Ground

Why Hollywood Contractors Call Pole Installers

Hollywood is our home base, so most jobs in the city are a short drive for our crews and equipment. That makes it easier to fit site visits, storm call-outs and tight construction schedules around your project instead of ours.

Pole Installers has been in the business for more than 27 years. Near the beach and the Intracoastal, Hollywood’s ground is mostly sand with water close to the surface, so a hole can cave in or fill with water before the concrete goes in. We plan the drilling depth, bit size and pour around those conditions, and we brace every pole until the concrete cures. Every crew member and every truck on your job belongs to us, so you deal directly with the people doing the work.

Hollywood Pole Installation for Every Type of Site

From a single flagpole outside a storefront to a full parking lot of light standards, one crew handles the job from the site walk to the backfill. We locate buried lines, check the soil and plan the truck’s path to each hole before anyone starts drilling.

For shopping plazas, HOA communities and office parks, our light pole installation crews put in parking lot and walkway lighting, either on a fresh foundation or a repaired one. Builders and homeowners call us for utility and meter poles that bring power to a lot under construction or a well pump. Along Hollywood Boulevard, Federal Highway and US-441, we handle sign pole installation for pylon, plaza, fuel and LED signs, and we set sports lighting poles for fields and courts. The holes themselves come from our in-house auger drilling team.

Your electrician, general contractor and the City of Hollywood inspector all get a pole that is plumb, at the specified depth and ready for wiring when they need it.

Texoma 650 pressure digger used for pole foundations

What We Install Around Hollywood

Concrete street light poles along a waterfront walkway

Light Poles

Parking lot and walkway light poles for plazas, storefront strips, HOA communities and office parks, set on a new foundation or a rebuilt one.

American flag on a flagpole against a blue sky

Flagpoles

Single and multi-pole flag displays for dealerships, schools, condos and city properties, drilled, set in concrete and checked for plumb.

Wood power poles with transformers

Power Poles

Temporary and permanent power poles that carry service from the meter to a new build, a well pump, a gate or an outbuilding.

Large commercial sign pole in a South Florida parking lot

Sign Poles

Pylon, plaza and monument sign poles for storefronts and gas stations across Hollywood, set on deep concrete foundations sized for the sign’s wind load.

Crane truck prepared for commercial pole installation

Pole Removal & Replacement

Leaning, rusted or storm-damaged poles pulled out, the hole or base prepared, and a new pole set plumb and ready for the electrician.

Crane and crew installing a wood utility pole

Utility Poles

Wood, steel and concrete poles for private power, cable and telecom lines on residential lots, developments and commercial property.

Built for Broward's Hurricane Wind Loads

Broward County sits in the High-Velocity Hurricane Zone of the Florida Building Code, the strictest wind standard in the state. A pole that would be fine inland can lean or fail here if the foundation is too shallow or the backfill isn’t compacted, so every hole we drill is sized from the engineer’s drawings or the pole manufacturer’s specifications.

What Goes Into Every Hollywood Foundation

Wind-Rated Depth

Hole depth and diameter match the engineer's or manufacturer's specs for HVHZ loads.

Sand and High Water

Near the beach we plan the bit, depth and pour so the hole holds until the concrete is in.

Embedded or Anchor-Bolt

Direct-embed poles lock into concrete; anchor-bolt bases let steel poles be swapped later.

Storm Replacement

Damaged poles removed and replaced plumb in one trip from our Hollywood base.

How Your Hollywood Project Runs

Four steps from your first call to poles set and verified on your site.

Engineered pole base and anchor-bolt specification drawing
01

Send Project Details

Share site plans, specs or a few photos of the site. That tells us which trucks to bring and how long the job will take.

Pole Installers crew completing a South Florida pole project
02

Get a Written Quote

You receive a written price that covers drilling, setting, concrete or backfill, and the equipment needed.

Pole Installers crew setting a pole beside the drilling rig
03

Pick a Work Date

Once you approve, we book the crew and agree with your site manager where the trucks will stage.

Pole Installers LLC owner on a pole-setting job site
04

Poles Set and Checked

Each pole goes in plumb and braced, and we walk the site with you before we leave.

FAQ

Hollywood Pole Project Questions

Every job is quoted on its own. Price depends on the pole type and height, how many poles you need, the foundation your engineering calls for, and how easily our equipment can reach the spot. Send us your plans or a few photos and we’ll return a detailed written quote. Estimates are free.

Yes. Most of our work is commercial, but we also set meter and utility poles, flagpoles and light poles for homeowners and builders in Hollywood, Pembroke Pines, Hallandale Beach and the rest of Broward County.

Depth comes from the pole’s height and load, the wind rating and the soil. Loose sand and a high water table near the coast can call for a deeper or wider foundation than the same pole would need further inland. We confirm the depth for every site from the project specs before we drill.

Yes. We schedule around active site work, coordinate equipment staging with your site manager, and leave every pole set plumb and ready for wiring or fixtures.

Yes. We remove leaning, cracked or downed poles and set replacements across Hollywood and South Florida, bringing the equipment for the removal and the new install in one trip.

Serving Hollywood and the Rest of South Florida

Pole Installers LLC is based in Hollywood and works throughout Broward County, including Pembroke Pines, Hallandale Beach, Dania Beach, Davie and Fort Lauderdale. We also serve Miami-Dade, Palm Beach, Martin, St. Lucie and Monroe counties, and projects anywhere in Florida.

Planning a Pole Project in Hollywood? Get a Free Quote

Send us your plans, specs or a few site photos. We’ll come back with a written quote, the equipment we’ll bring and a date our crew can start.

Need More Help?

Call

+1 (754) 399-4770

Send Us Email

[email protected]

Scroll to Top