- Commercial Pole Setting & Installation
Pole Setting Services in South Florida
Pole Installers is a licensed South Florida pole setting contractor serving commercial properties, general contractors, and municipal agencies. Our crews operate auger trucks, cranes, and boom equipment to drill, set, and brace every type of pole — from parking lot light poles to private utility poles — with poured concrete foundations built for permanent stability. Whether your project involves a single flag pole or a full site buildout with dozens of light standards, we bring the equipment, the crew, and decades of field experience to get it done right.
A Licensed Pole Contractor You Can Trust
- Heavy-Duty Equipment Fleet
Our fleet includes auger trucks rated for holes up to 48 inches in diameter, boom trucks for heavy pole placement, and cranes for tall or oversized structures. Every piece of equipment is maintained and ready for commercial-scale projects throughout South Florida.
- Schedule On Your Timeline
We coordinate directly with your project manager to schedule around active site work. Share your scope and deadlines, and we lock in equipment staging, access routes, and a work date that keeps your project on schedule without disruption.
- Plumb, Stable Results
Every pole is drilled to the correct embedment depth for its height and load rating, set vertical with precision alignment tools, and secured with poured concrete or engineered backfill. Our placements hold through Florida wind loads, storm seasons, and long-term ground settlement.
- Why Pole Installers
Why South Florida Contractors Choose Pole Installers
Commercial pole work is structural work. The hole depth, the soil conditions, the alignment, and the backfill method all determine whether a pole stays plumb for decades or shifts within months. Pole Installers has been handling this work across South Florida for over 27 years, setting poles for parking lot lighting projects, private power runs, municipal flag poles, commercial signage, and utility infrastructure. Our crews understand the difference between sandy coastal soil in Fort Lauderdale and the limestone conditions further west, and we adjust drilling depth, bit selection, and compaction methods accordingly.
As a family-owned pole company, we control every phase of the job — from the initial site visit through drilling, setting, bracing, and backfill. We do not subcontract our crew or lease our equipment. When you hire Pole Installers, you get the same experienced operators on every project, the same equipment maintained to commercial standards, and direct communication with the people doing the work. That consistency is why general contractors and property managers across South Florida call us back project after project.
- Licensed & Insured Operations
- Commercial Project Coordination
- Precision Depth & Alignment
- Concrete & Compacted Backfill
- Dependable Results
Florida Pole Setters You Can Count On
Pole Installers handles the full scope of commercial projects — new installations, damaged pole removal, emergency replacements after storms, and site preparation for large-scale buildouts. Our equipment handles poles made from wood, steel, aluminum, and concrete in heights ranging from standard 20-foot light poles to tall utility structures exceeding 80 feet. Every project starts with a site assessment where we confirm soil type, required embedment depth, access for equipment, and any underground utilities that need to be avoided before drilling begins.
We also coordinate closely with electricians, general contractors, and municipal inspectors to make sure everything is set to specification and ready for wiring, fixtures, or whatever comes next in your project timeline. Our job is to deliver a plumb, stable, code-ready installation — on time, without callbacks, and without surprises on your job site.
- New Pole Installations
- Removal & Replacement
- Licensed Commercial Crews
- Storm Damage Response
- Our Services
Our Pole Setting Services for Commercial Properties
Light Poles
Parking lot, roadway, and property perimeter light pole setting for commercial plazas, retail centers, office parks, HOA communities, and outdoor recreation facilities across South Florida.
Flagpoles
Flag poles for corporate headquarters, car dealerships, government buildings, schools, and municipal properties. We drill, set in concrete, and verify plumb for single or multi-pole configurations.
Power Poles
Private power pole installation for construction sites, agricultural properties, and commercial facilities that need utility service extended from the main grid to remote structures on the property.
Sign Poles
Commercial sign pole installation for retail centers, gas stations, restaurants, and highway-visible businesses that require tall or heavy-gauge steel poles anchored in deep concrete foundations.
Pole Removal & Replacement
Safe extraction of damaged, leaning, or storm-struck poles including full hole preparation and new pole installs so replacements go in clean, plumb, and ready for wiring or fixtures.
Utility Poles
Wood, steel, and concrete utility poles for private properties, telecom carriers, and commercial developments requiring dedicated power, cable, or communication line infrastructure.
- Flagpoles
Flagpole Installation
We install commercial and residential flagpoles, from a single pole at a home or storefront to multi-pole displays at corporate headquarters, car dealerships, schools, government buildings and municipal properties. Every flagpole is drilled, set in concrete and checked for plumb so it stands straight for years.
- Ground-set sleeves. A sleeve is set in a concrete foundation and the pole stands inside it, so the pole can be removed or replaced later without breaking out the foundation.
- Direct-embedded poles. The pole is set straight into a drilled hole and locked in place with concrete.
Foundation size and depth follow the flagpole manufacturer’s specifications and the wind rating for your county. Holes are drilled by our own auger services crew, so one team handles the job from drilling to the finished pole.
Replacing Leaning or Storm-Damaged Flagpoles
A leaning, corroded or storm-damaged flagpole is a safety risk and the first thing visitors see. We remove the old pole, prepare the foundation or sleeve, and set the new pole plumb. After a storm, our crews bring everything needed for removal and replacement so the work is done in a single mobilization.
- Our Approach
How We Set Your Poles
Four steps from first contact to verified placement on your commercial job site.
Send Project Details
Share site plans, specifications, and photos so we can determine equipment needs and scheduling.
Review Your Estimate
We deliver a detailed written quote covering drilling, setting, backfill, and all equipment for your project.
Schedule Your Crew
Once approved, we lock in a work date and coordinate equipment staging with your site manager.
Poles Set and Verified
We set every pole plumb, verify alignment and stability, and close out so your project moves forward.
Questions About Setting Commercial Poles
How deep do commercial poles need to be set in Florida?
Depth depends on height, load rating and soil. Concrete direct-burial poles in Florida are usually set about 7 ft deep, but pole type and engineering can change that. We confirm the depth for every site from the project specs.
Do you handle pole removal and replacement after storm damage?
Yes. Pole Installers responds to storm damage calls across South Florida for emergency pole extraction and replacement. Our crews bring all equipment needed for safe removal, hole preparation, and new installation so the entire project gets completed in a single mobilization.
What types of poles do you install for commercial properties?
We set light poles, flag poles, utility poles, power poles, sign poles, and specialty structures for commercial sites, parking facilities, municipal properties, and private developments. Every placement is drilled and set to specification with concrete foundations for long-term stability.
Can you coordinate with our electrician or general contractor?
Absolutely. We work alongside electricians, GCs, and municipal inspectors on commercial projects throughout South Florida. We schedule around active site work and deliver poles set plumb, braced, and ready for wiring or fixture mounting on your timeline.
What equipment do you use to set commercial poles?
We use digger derricks,
pressure diggers, and skid steers with augers for tight or hard-to-reach locations. We maintain all equipment in-house so we arrive fully prepared for any commercial project.
Do you install and replace commercial flagpoles?
Yes. We install new commercial and residential flagpoles and replace leaning or storm-damaged ones. We drill the hole, set the pole in concrete or a ground-set sleeve and verify it is plumb, for single poles or multi-pole displays across South Florida and anywhere in Florida.
- Areas We Serve
Setting Poles Across South Florida and Beyond
Pole Installers LLC is a pole setting contractor based in Hollywood, serving Miami-Dade, Broward, Palm Beach, Martin, St. Lucie and Monroe counties, and projects anywhere in Florida.
- Miami
- Hialeah
- Homestead
- Key West
- Hollywood
- Fort Lauderdale
- Plantation
- Coral Springs
- Pompano Beach
- Deerfield Beach
- Boca Raton
- Delray Beach
- Boynton Beach
- West Palm Beach
- Jupiter
- Stuart
- Davie
- Sunrise
- Port St. Lucie
- Naples
- Or Anywhere in the State of Florida
- Free Estimates
Have A Commercial Project? Get Your Free Quote!
Send your site plans, specifications, or project details and our team will deliver a detailed written quote covering equipment, crew, and a scheduled work date for your installation.